Clarke CTS12 Spezifikationen PDF herunterladen (Seite 16)

IMPORTANT CHECKS - BEFORE STARTING

IMPORTANT:

Before attempting to use the machine, it is necessary to ensure the various

components are correctly adjusted, and securely fitted.

• Make sure that the blade is securely fitted.

• Ensure the Blade Guard is fitted securely and capable of dropping under its own weight.

• Remove all tools or pieces of wood from the top of the table.

• If the Rip Fence is being use, make sure it is secure before use.

• Ensure the saw Blade is at the desired height and locked in place before use.

OPERATION

STARTING AND STOPPING THE MACHINE

The ON and OFF switches are located on the front of the table saw.

1. Plug the mains plug into the mains supply.

2 Connect a vacuum cleaner nozzle to the dust outlet at the rear of the table saw.

3 Press the

Green

button of the switch marked ‘I’.

• The table saw will now start. Always allow the blade to reach full speed before performing any

cutting operations.

To switch the saw off:

4 Push the

Red

button of the switch marked ‘O’.

• The table saw will stop.

NOTE: The blade will continue to rotate for a few seconds after the saw has been switched

off.

If during use the power is interrupted for any reason, the table saw will automatically switch OFF. You

can restart the table saw by pressing the Green ON button.

TURNING THE LASER ON/OFF.

The saw is fitted with a laser cutting guide.

1. Use the ON/Off switch to turn the laser on or off.

Fig.13

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Keine Kommentare

Clarke CTS12 Spezifikationen Seite 16