Clarke CTS12 Spezifikationen PDF herunterladen (Seite 14)

E. RIP FENCE

The rip fence has the following parts:

1. The handle assembly ‘A’

2. The fence ‘B’

3. Two fixings, each comprising a coach bolt and

securing knobs ‘C’.

1. Slide the handle assembly (A) into the slot in the

front rail, and push the handle down to lock the rip

fence to the table.

2. Pull the slide bar out slightly and slide the fence (B)

behind the slide bar as shown.

3. Tighten the securing knobs (C) to lock the fence to

the handle assembly.

Note: The rip Fence has two slots, allowing the fence

to be attached in the ‘high’ or ‘low’ position

Fig.8

Fig.19

Fig.9

F. CONNECT THE VACUUM HOSE

1. Attach the hose as shown in the diagram in Fig.9

2. Connect a vacuum cleaner to the dust outlet port

on the rear of the table saw.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Keine Kommentare

Clarke CTS12 Spezifikationen Seite 14