Clarke CLS400 Spezifikationen PDF herunterladen (Seite 4)

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

5. Avoid accidental starting of the machine. Ensure the switch is in the off

position before plugging the machine in to the power supply. Plugging in

power tools that are switched on invites accidents.

6. Dress properly. Do not wear loose clothing or jewellery which may get

caught in moving parts. Wear protective hair covering to contain long

hair. For best footing, wear rubber soled footwear. Keep floor clear of oil,

scrap wood, etc.

7. Wear gloves while handling saw blades and always store them in the

protective packing provided. A dust mask should be warn to reduce the

inhalation of harmful dust.

8. Always remove and stack cut timber in a suitable place, away from the

operator.

9. Switch the machine OFF immediately after the task is completed.

POWER TOOL USE AND CARE

1. Do not force the machine. Use the correct tool for your application. It will

do a better and safer job at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and

must be repaired.

3. Disconnect the power tool from the power supply before making any

adjustments or storing the tool. These measures will reduce the risk of the

power tool starting accidentally.

4. Store power tools out of the reach of children and do not allow persons

unfamiliar with these instructions to operate this product. Power tools are

potentially dangerous in the hands of untrained users.

5. Maintain power tools in top condition. Keep machines clean for the best

and safest performance. Check for misalignment or binding of moving

parts, broken parts, or any condition that may affect the tool’s operation.

If damaged, have the tool repaired before use. Many accidents are

caused by poorly maintained power tools.

6. Machine cleanliness. Do not allow the ventilation slots in the motor to

become blocked with dust.

7. Check the power tool for damage before use. Any damaged part should

be inspected to ensure that it will operate properly and perform its

intended function. Any damage should be properly repaired or the part

replaced. If in doubt, DO NOT use the machine. Consult your local dealer.

SERVICING

1. When necessary, have your power tools serviced or repaired by a

qualified person using identical replacement parts. This will ensure that the

safety of the power tool is maintained.

1 2 3 4 5 6 7 8 9 ... 19 20

Keine Kommentare

Clarke CLS400 Spezifikationen Seite 4