Clarke CLS400 Spezifikationen PDF herunterladen (Seite 14)

Parts & Service: 020 8988 7400/E-mail:Part[email protected] or [email protected]

before cutting. Take care not to

let the log bounce against the

saw blade. Always remove the

sawn wood before attemping to

cut the next piece.

5. Regardless of the diameter of the

wood, only one piece should be

placed on the cradle for cutting

at any one time. Do not attempt

to saw multiple pieces at once.

• Always control the cradle

keeping both hands on the

handles provided. When pushing

the wood into the saw, take care

that the motor speed does not

drop.

6. To stop the saw press the OFF

switch. Always switch off before

unplugging and never leave the

saw running unattended.

7. Avoid putting unnecessary

pressure on the blade and avoid

applying lateral pressure. Let the blade work naturally.

• Never try to re-start the saw if the blade becomes jammed in the

workpiece.

CHANGING BLADES

CAUTION: ONLY USE SAW BLADES WITH THE CORRECT FITTING AS

SUPPLIED. ALWAYS ENSURE THE SAW IS DISCONNECTED FROM THE

POWER SUPPLY BEFORE INSTALLING/REMOVING THE BLADE.

1. Ensure the power cable is disconnected from the power supply. Take care

that the saw blade has cooled down before touching if it has just been in

use.

2. Take off the removable guard by undoing the 4 bolts.

3. Use the blade locking wrench to prevent the blade from turning and

remove the blade retaining nut using the open wrench provided.

4. Remove the washer and outer retaining disc, and remove the blade while

deflecting the inner guard by hand. Brush away any dust or debris from

the spindle before fitting the new blade.

5. Replace in reverse order, ensuring the blade is fitted the right way round

and that the retaining nut is secure. Use the blade locking wrench to stop

the blade from turning while tightening the nut with the open wrench.

Blade

Locking

Wrench

Open Wrench

Securing

Knob

Stop

Bar

Fig 14

Fig 15

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Clarke CLS400 Spezifikationen Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kreissägen Clarke CLS400