Clarke CBS12WC Bedienerhandbuch

OPERATING & MAINTENANCEINSTRUCTIONSBANDSAW12”(305mm) & 14”(355mm)Model Nos. CBS12WC & CBS14WC Part Nos. 6460070

2.3 Slacken the grub screw (H), which secures theshaft carrying The Blade Guide Bearing (D), andadjust the position of the bearing so that it is1/64”b

BLADE GUIDESBlade guides should be inspected regularly for wearor chipping. When replacing guides replace all guidesat the same time, both upper and l

1 Stand Top FMEBS14S012 Screw 3/8” FMEBS14S023 Leg FMEBS14S034 Brace - Side FMEBS14S045 Brace Front and Rear FMEBS14S056 Bolt Cap Hd. Sq. Shoulder FME

PARTS LISTNo. Description Part No.1 Frame FMEBS12S0012 Base FMEBS12S0023 Upper Wheel Box FMEBS12S0034 Lower Wheel Box FMEBS12S0045 Strengthener FMEBS1

PARTS DIAGRAMCBS12WC14

PARTS LISTNo. Description Part No.1 Left Bracket Upper Housing. FMEBS14P012 Right Bracket FMEBS14P023 Bracket Upper Mount FMEBS14P034 Bracket Upper Wh

PARTS DIAGRAMCBS14WC16

17PARTS DIAGRAMCBS14WC

Thank you for selecting this CLARKE Bandsaw .Before attempting to operate the machine, please read this instruction manual thoroughly, and follow alld

SAFETY PRECAUTIONSGENERAL SAFETY RULES FOROPERATING MACHINERYWARNING: As with all machinery, there are certain hazardsinvolved with their operation a

ADDITIONAL SAFETY RULESFOR BANDSAWS• Use a Push Stick or scrap of wood to do thepushing and guiding, when sawing small pieceswhich require the fingers

IABCDEFGHJKLMCFRONTPRINCIPAL PARTS(Ref. Fig. 1)A Blade Tension Adjuster KnobB Blade Guard and Upper Guide BlockSecuring Knob.NOTE: This item is mounte

Fig. 4ASSEMBLYPlan your installation. Ensure adequate floor space isavailable, with good lighting and ventilation, and anadequate electrical supply is

Fig. 6Table securingboltTrunnion BaseBolt trunnionsto table3. With the blade located in the centre hole, line upthe slotted holes of the larger rear t

D. ELECTRICAL CONNECTIONS1. Switch BoxOn the left hand side of the frame, between the upperand lower wheel covers, are two loosely fitted screws.These

CDEFGAFig 10BFAEGDBC1. Upper Blade Guide (Ref Fig. 10)NOTE: The Guide Block Bracket (G), carries the BladeGuide Bearings (A). These bearings provide