Clarke CR 28 Boost Betreibershandbuch PDF herunterladen (Seite 14)

ENGLISH

Operator’s Manual - CR 28 BOOST

BEFORE START-UP

WARNING!

At every machine start-up, check that, between the deck (4 or 5) and the machine or between the squeegee

(12) and the machine, there is no foreign material which may prevent the deck and the squeegee from lifting.

This check is necessary because, if the machine has been turned off without lifting the BOOST

deck and the

squeegee, when turned on again, the deck and the squeegee lift automatically.

Brush installation/removal

The machine can be equipped with different brushes (88) according to the type of ﬂ oor to be cleaned.1.

For the installation/removal, proceed as follows.2.

Insert the ignition key (41) and turn it to “I”.

WARNING!

Before pressing the switch (34), always check that, between the deck (4) and the machine, there is no foreign

material which may prevent the deck from lifting.

Lift the deck by pressing the switch (34).3.

Turn the ignition key (41) to “0” and remove it.4.

Install the brush (88) so that it engages the BOOST5.

deck.

To remove the brush, perform steps 2 to 5 in the reverse order.6.

Brushes and Pads available

Pads

Size Description Part No.

14 x 28 Red (5 Pack) 997001

14 x 28 Black (5 Pack) 997000

14 x 28 White (5 Pack) 997002

14 x 28 Blue (5 Pack) 997006

14 x 28 Maroon (10 Pack) 997018

Brushes

Size Description Part No.

14 x 28 Poly Brush 30752A

14 x 28 Nylon Brush 30751A

14 x 28 Grit Brush 30753A

Brush application guide

Models POLYPROPYLENE NYLON CLEAN GRIT

General cleaning:

Concrete

Terrazzo ﬂ oor

Ceramic tiles/quarrystones

Marble

Vinyl tiles

Rubber tiles

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 65 66

Kommentare zu diesen Handbüchern

Keine Kommentare

Clarke CR 28 Boost Betreibershandbuch Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Scrubber Clarke CR 28 Boost