Clarke FG2000 Spezifikationen

OPERATION & MAINTENANCEINSTRUCTIONSLS0609GENERATORMODEL NO: FG2000PART NO: 8857725

10BEFORE USING THE GENERATORIMPORTANT: Generators should ALWAYS be earthed.Attach a suitable earth lead to a good earth - water pipe, ground spike etc

11CHECKING THE ENGINE OIL LEVEL1. Turn the oil filler cap anti-clockwise and remove from the oil tank, wipe the dipstick with a clean cloth.2.Insert t

12CHECKING THE FUEL LEVEL1. To add fuel, open the fuel filler cap.2.Fuel filterJust inside the fuel tank is a fuel tank filter, check this filter peri

13USING YOUR GENERATORSTARTING THE ENGINE1. Remove all connections from the sockets.2.Set the fuel supply lever to the ‘on’ position.3. If you are sta

145. Pull the starting handle lightly until you start to feel resistance and then pull up sharply to start the generator.NOTE: You may have to do this

15CONNECTING ELECTRICAL DEVICESThe generator can supply both 230V AC and 12V DC.AC POWER1.Start the engine. See page 13.2. Make sure the appliance is

16DC POWERFor charging car batteries only1. Start the generator.2.Connect the battery charging leads to the generator.3. Connect the battery charging

17SHUTTING DOWN THE GENERATOR1. Disconnect all appliances connected to the generator.2.Set the engine switch to ‘0’.3. Set the fuel supply lever to ‘O

18MAINTENANCECHANGING THE ENGINE OIL1. Unscrew and remove the oil filler cap/dipstick.2. Place a oil collection tray under the drain plug.3. Unscrew t

19CHANGING THE SPARK PLUGS1. Remove the spark plug cap from the spark plug.2. Use the supplied spark plug spanner to remove the spark plug.3. Remove a

2INTRODUCTIONThank you for purchasing this CLARKE Generator.Before attempting to use this product, please read this manual thoroughly and follow the i

20CHECKING THE AIR FILTER1. Remove the wingnut and remove the air filter cover.2.Remove the wingnut shown.3.Remove the air filter element.4. Make sure

21CLEANING THE FUEL VALVE FILTER / DRAINING THE FUEL TANK1. Set the fuel supply valve to OFF.2. UAdd picVALVE FILTER‘O’ RINGCUPnscrew and remove the c

22TROUBLESHOOTINGPROBLEM CAUSE SOLUTIONThe generator fails to startIgnition switch is off Set the ignition switch to ‘on’Not enough oil in the generat

23SPECIFICATIONSFG2000Engine Engine Model UP168Displacement (cm3)196Max. power output (hp/rpm) 6.5 / 3000Start system RecoilFuel tank capacity (L) 4.5

24EXPLODED PARTS DIAGRAM

25PARTS LISTNO DESCRIPTION PAR T N O NO DESCRIPTION PAR T NO1 Frame RK200001 16 Housing RK2000162 Rubber Right Bottom RK200002 17 Pan Screw 5x12 RK200

26DECLARATION OF CONFORMITY

27DECLARATION OF CONFORMITY

3TABLE OF CONTENTSINTRODUCTION...2GUARANTEE ...

4GENERAL SAFETY RULES WORK AREA • Always use in a well ventilated area. • Always position the exhaust outlet away from people.• Never use in a confine

56. Never start the engine if there is spilled fuel. Any spillage must be wiped clean and the generator allowed to dry before attempting to start the

6SAFETY SYMBOLSCaution - The user should be aware of a general hazardDangerous VoltageFlammable Hot Surface - Do not touchPoisonous fumes - Do not use

7GENERATOR OVERVIEWNO DESCRIPTION NO DESCRIPTION1 Handle 10 Spark Plug2 AC Plug Socket (230V) 11 Air Filter3 AC Overload Reset Button 12 Choke4 DC Ove

8UNPACKING AND ASSEMBLYUnpack your generator and check to ensure the following items are present. Should there be any missing or damaged caused during

9FITTING THE FEET/WHEEL KIT1. Lay the generator on its front end and attach the 2 feet as shown.2. Fix each foot to the frame using 4 x Short Bolts